How To Back Up a MySQL Database to DigitalOcean Spaces Using LVM Snapshots

By Hanif Jetha on 26 May 2018

Introduction

Regular database backups are a crucial step in guarding against unintended data loss events. Designing an effective backup and recovery strategy often involves trading off performance impact, implementation costs, and data storage costs with recovery speed, data integrity, and backup coverage. The optimal solution will depend on your recovery point and time objectives and database scale and architecture.

In this guide we’ll demonstrate how to perform a live (or “hot”) physical backup of a running MySQL database using LVM snapshots. We’ll then compress and store the data in a DigitalOcean Space.

The procedure presented in this tutorial is well suited for large MySQL databases, databases using a mixture of storage engines (such as InnoDB, TokuDB, and MyISAM), and database servers with multiple block storage volumes attached, managed using LVM.

We’ll begin by ensuring that our Ubuntu 16.04 server can take and mount an LVM snapshot. Next, we’ll take an LVM snapshot of the logical volume containing MySQL’s data directory. We’ll then mount this snapshot volume (frozen logical volume), and compress and ship the MySQL data directory to DigitalOcean Spaces for storage. To conclude, we’ll briefly run through a sample recovery scenario.

Prerequisites

To use this guide, you’ll need to have the following prerequisites available to you:

Once you have all of this set up, you’re ready to begin with this guide.

Step 1 — Investigate MySQL and LVM Configuration

To begin, we’ll locate our MySQL data directory and note those details about our LVM configuration.

Locate MySQL datadir

To find the path to your MySQL data directory, run the following command:

    
        
            
mysqladmin -u root -p variables | grep datadir

Enter your MySQL root password when prompted. You should see output similar to the following:

    
        
            
Output
| datadir | /data/mysql/

For the MySQL installation used in this guide, the data directory is /data/mysql.

We now need to confirm that /data/mysql lives on an LVM logical volume. To confirm this, we’ll run lsblk:

    
        
            
lsblk

You should see output similar to the following:

    
        
            
Output
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 600G 0 disk
└─vg1-mysql_data 252:0 0 475G 0 lvm /data
vda 253:0 0 160G 0 disk
├─vda1 253:1 0 159.9G 0 part /
├─vda14 253:14 0 4M 0 part
└─vda15 253:15 0 106M 0 part /boot/efi

From this we observe that /data is in fact the mount point for an LVM logical volume called mysql_data. It is a member of the volume group vg1.

We now need to ensure that we have enough free space available in our volume group vg1 to take an LVM snapshot.

Explore LVM Configuration

It’s important to note that output from the commands described in this section will vary depending on your server’s hardware and LVM configuration. Let’s quickly investigate the hardware and LVM configuration for the Ubuntu 16.04 server used in this guide.

To begin, let’s find out how many physical volumes we have using pvscan:

    
        
            
sudo pvscan

You should see output similar to the following:

    
        
            
Output
PV /dev/sda VG vg1 lvm2 [500.00 GiB / 25.00 GiB free]
Total: 1 [500.00 GiB] / in use: 1 [500.00 GiB] / in no VG: 0 [0 ]

We observe that we have one 500GB physical volume (/dev/sda) which is in one volume group (vg1). 475GB of this physical volume has been allocated off to logical volumes, while 25GB remains free for use by the volume group.

We can confirm this by taking a deeper look into the vg1 volume group using the vgdisplay command:

    
        
            
sudo vgdisplay

You should see output that resembles the following:

    
        
            
Output
--- Volume group ---
VG Name vg1
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 2
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 1
Max PV 0
Cur PV 1
Act PV 1
VG Size 500.00 GiB
PE Size 4.00 MiB
Total PE 127999
Alloc PE / Size 121600 / 475.00 GiB
Free PE / Size 6399 / 25.00 GiB
VG UUID KEsoDE-zON7-NdyO-ioxb-6FSl-CB4m-S3QCRj

From the Alloc PE / Size and Free PE / Size lines, we observe that we have 475GB allocated, and 25GB free in the vg1 volume group. The Cur PV line shows us that we have 1 physical volume in this volume group. The Cur LV line indicates that we’ve used the pool of space in this volume group to create 1 logical volume.

Let’s now take a look at this logical volume using lvdisplay:

    
        
            
sudo lvdisplay

You should see output similar to the following:

    
        
            
Output
--- Logical volume ---
LV Path /dev/vg1/mysql_data
LV Name mysql_data
VG Name vg1
LV UUID T98x9c-zvC1-f0Rw-4ipn-Cxo2-duwk-KUwQQc
LV Write Access read/write
LV Creation host, time LVM, 2018-04-18 20:11:48 +0000
LV Status available

# open 1

LV Size 475.00 GiB
Current LE 121600
Segments 1
Allocation inherit
Read ahead sectors auto

- currently set to 256
  Block device 252:0

From LV Size we see that we have one 475GB logical volume, mysql_data, found at /dev/vg1/mysql_data (recall that vg1 was the name of mysql_data’s volume group).

To summarize, on the Ubuntu 16.04 server used for this tutorial, we have one 500GB physical volume (/dev/sda) used to back one volume group (vg1), from which we’ve created a single 475GB logical volume (mysql_data). This leaves 25GB of free space in the volume group which can be used to create further logical volumes (and snapshots).

Your hardware and LVM configuration will likely be different; you may have several block storage devices attached, pooling into single or multiple volume groups. The procedure for taking a snapshot of a given logical volume will nevertheless be the same.

Using the series of commands presented in this section, you should now have a general sense of your LVM and hardware configuration.

In the next step, we’ll prepare your database server for LVM snapshotting.

Step 2 — Prepare Your Server for LVM Snapshots

To ensure that we can safely take an LVM snapshot, we need to provision enough disk space to cover any writes or changes that may occur during the backup and file transfer to Spaces. Depending on the size of your database, this backup may take several hours to complete, so it’s best to err on the side of caution here. If your snapshot volume runs out of space while performing the backup, the snapshot volume will become invalid and you will no longer have a consistent backup.

In the previous step we observed that the volume group (vg1) containing our principal logical volume (mysql_data) only had 25GB free. Although it may be the case that 25GB of changes won’t be written to disk in the time it takes to back up our database, we’d ideally like a margin of safety of at least 100GB. In a production setting, it would be best practice to measure the average amount of data being written to disk during the scheduled backup window and scale the snapshot volume size accordingly.

To add an additional 75GB of space to the vg1 volume group, we can either attach a block storage device, or increase the size of the volume currently attached to the Droplet. In this tutorial, we’ll expand the already attached block storage volume; to learn more about attaching an additonal block storage volume, you can consult An Introduction to DigitalOcean Block Storage.

Note: Some regions do not yet support Block Storage and you may not be able to attach a Block Storage volume to your Droplet. A reasonable workaround in this case would be to Snapshot your Droplet and create a new Droplet using this Snapshot image, to which you can then add Block Storage.

Let’s expand the block storage volume attached to this Droplet.

Navigate to DigitalOcean’s web control panel and from the Dashboard, navigate to your Droplet.

In the sidebar, click into Volumes:

Sidebar

From this pane, you should see any block storage volumes attached to your Droplet. For the Ubuntu Droplet used in this guide, we have one attached block storage volume:

Block Storage Volume

Click on More and then Resize volume.

From here, you can select one of several predefined volume sizes, or choose your own volume size. Let’s increase the 500GB volume by 100GB to 600GB:

Resize Volume

Press Continue. Your attached block storage volume has now been increased by 100GB.

To propagate this device change to LVM, we need to run pvresize.

Log in to your server, and run pvscan again to scan for physical volumes:

    
        
            
sudo pvscan

You should see the same output as before for our /dev/sda physical volume:

    
        
            
Output
PV /dev/sda VG vg1 lvm2 [500.00 GiB / 25.00 GiB free]
Total: 1 [500.00 GiB] / in use: 1 [500.00 GiB] / in no VG: 0 [0 ]

Now, run pvresize on the volume to fill out the extra space that we just added:

    
        
            
sudo pvresize /dev/sda

You should see the following output:

    
        
            
Output
Physical volume "/dev/sda" changed
1 physical volume(s) resized / 0 physical volume(s) not resized

Let’s confirm that our physical volume is now 100GB larger by running another pvscan:

    
        
            
sudo pvscan

We observe that the /dev/sda physical volume is now 600GB:

    
        
            
Output
PV /dev/sda VG vg1 lvm2 [600.00 GiB / 125.00 GiB free]
Total: 1 [600.00 GiB] / in use: 1 [600.00 GiB] / in no VG: 0 [0 ]

Let’s now confirm that our volume group’s free space has also increased by 100GB:

    
        
            
sudo vgdisplay

You should then see the following output:

    
        
            
Output
--- Volume group ---
VG Name vg1
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 3
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 1
Max PV 0
Cur PV 1
Act PV 1
VG Size 600.00 GiB
PE Size 4.00 MiB
Total PE 153599
Alloc PE / Size 121600 / 475.00 GiB
Free PE / Size 31999 / 125.00 GiB
VG UUID KEsoDE-zON7-NdyO-ioxb-6FSl-CB4m-S3QCRj

This indicates that we now have 125GB of free space available from which to create our snapshot volume.

For the purposes of this tutorial, 125GB will be plenty for absorbing writes and changes during the backup and upload procedure, but in a production setting the snapshot volume size should be scaled proportionally to anticipated disk usage during the backup window.

Now that we have enough space available in our volume group to cover any writes or changes that may occur during the snapshot and backup, we can move on to creating the snapshot volume.

Step 3 — Create and Mount LVM Snapshot

Warning: While the LVM snapshot is active, there will be some performance degradation when writing to disk. You should test this procedure first using a non-production database with simulated load to verify that this method will work in your production deployment.

We’ll now create a snapshot of the mysql_data logical volume using lvcreate. Before we do this, we need to freeze writes to the database using FLUSH TABLES WITH READ LOCK so that we can guarantee data consistency. The tables only need to be read locked until we run lvcreate , at which point they can be unlocked. If you script this series of commands, the total lock time should be very small depending on currently executing write queries.

Read Lock MySQL Database

Let’s begin by flushing tables. From the terminal on your database server, use mysql to log into your MySQL database:

    
        
            
mysql -u root -p

From the MySQL shell, run the FLUSH TABLES command to read-lock your database.

Warning: After running the following command, all open tables will be closed and all tables for all databases will be locked with a global read lock. If running this on a production database, it’s best practice to execute this command on a replica or as part of a script to minimize the amount of time the database will be locked.

    
        
            
FLUSH TABLES WITH READ LOCK;

You should see the following output:

    
        
            
Output
Query OK, 0 rows affected (0.00 sec)

Which indicates that your database has been read-locked. Don’t exit the MySQL prompt, we’ll need to keep it open.

We’ll now create and mount an LVM snapshot of the logical volume used to house our MySQL data.

Create and Mount Snapshot Volume

Keeping this MySQL client connection open, log in to your database server from a new terminal window.

Warning: If you close this connection, the lock will be discarded and writes will resume, rendering the snapshot inconsistent.

We can now take a snapshot of the mysql_data logical volume. We’ll allocate 100GB of buffer space to absorb writes and other changes as we perform the physical backup. To create the LVM snapshot, run the following lvcreate command:

    
        
            
sudo lvcreate -L 100G -s -n mysql_data_snap /dev/vg1/mysql_data

The -L flag specifies the size of the logical volume, in this case 100GB. -s indicates that the logical volume will be a snapshot, in this case of the /dev/vg1/mysql_data logical volume. We’ve chosen to name this snapshot volume mysql_data_snap.

You should see the following result:

    
        
            
Output
Logical volume "mysql_data_snap" created.

This indicates that we now have a copy of the mysql_data logical volume from which we can perform a backup.

Now that we’ve essentially “frozen” our MySQL data files at a point in time, we can unlock our database tables and resume writes. From your open MySQL connection, run the following command:

    
        
            
UNLOCK TABLES;

You should see the following result:

    
        
            
Output
Query OK, 0 rows affected (0.00 sec)

The tables have been unlocked and you can now safely close this connection.

At this point, your database is still live and accepting incoming connections and writes, but we have a consistent snapshot of the data at the point in time when we ran FLUSH TABLES WITH READ LOCK (or to be completely accurate, the point in time when the last write query after the FLUSH completed).

The final step consists of mounting this snapshot so that we can access these frozen data files.

First, we’ll create a mount point called /backup_src:

    
        
            
sudo mkdir /backup_src

Now, we’ll mount the snapshot volume to /backup_src:

    
        
            
sudo mount /dev/vg1/mysql_data_snap /backup_src

We can now access the frozen data files. Let’s take a look:

    
        
            
cd /backup_src
ls

You should see your MySQL data directory:

    
        
            
Output
lost+found mysql

Now that we have access to a consistent snapshot of our data, we can back it up to a DigitalOcean Space.

Step 4 — Compress and Upload Files to DigitalOcean Spaces

To upload this backup to our DigitalOcean Space, we’ll use the s3cmd tool which we installed and configured in the prerequisite steps.

We’ll first test our s3cmd configuration and attempt to access our backups Space (in this tutorial our space is named mysql-backup-demo):

    
        
            
s3cmd info s3://mysql-backup-demo/

You should see the following output:

    
        
            
Output
s3://mysql-backup-demo/ (bucket):
Location: nyc3
Payer: BucketOwner
Expiration Rule: none
Policy: none
CORS: none
ACL: 3587522: FULL_CONTROL

This output indicates that the connection was successful and s3cmd can transfer objects to the Space.

We’ll now compress and upload our MySQL data directory to the mysql-backup-demo space:

    
        
            
sudo tar -czvf - /backup_src/mysql | s3cmd put - s3://mysql-backup-demo/mysql_backup_180423.tar.gz

Here, we use tar to compress and archive the MySQL data directory, and pipe the output to s3cmd, which we use to transfer the compressed archive to Spaces. We’ve named the compressed archive mysql_backup_180423.tar.gz.

Since we used tar in verbose mode, you’ll see the list of files being compressed (to hide this output, omit the -v flag in the above command).

The output will conclude with the following file transfer information:

    
        
            
Output
...
upload: '<stdin>' -> 's3://mysql-backup-demo/mysql_backup_180423.tar.gz' [part 1, 1417kB]
1451996 of 1451996 100% in 0s 1993.41 kB/s done

Once the transfer completes, we’ll verify that the file was successfully transferred to our Space by listing the Space contents:

    
        
            
s3cmd ls s3://mysql-backup-demo/

You should see the backup archive file:

    
        
            
Output
2018-04-23 20:39 297 s3://mysql-backup-demo/mysql_backup_180423.tar.gz

At this point, we’ve successfully completed a physical MySQL backup to DigitalOcean Spaces.

We’ll now unmount and drop the snapshot volume, restoring the used space to our volume group vg1.

Step 5 — Unmount and Drop Snapshot Volume

Now that our data has been backed up, we no longer have any use for the snapshot volume we created earlier in this tutorial and can safely drop it.

To unmount the volume, run the following command:

    
        
            
sudo umount /backup_src

Replace /backup_src with your snapshot volume’s mount point.

We can now drop the snapshot volume. To do so, run the following command:

    
        
            
sudo lvremove vg1/mysql_data_snap

Here, vg1 corresponds to your volume group name, and mysql_data_snap to your snapshot volume name.

You’ll be prompted to confirm removal, to which you should respond Y.

You should see the following output:

    
        
            
Output
Logical volume "mysql_data_snap" successfully removed

The snapshot volume has successfully been dropped. You’ve now completed a full MySQL physical backup and uploaded it to your DigitalOcean Space.

We’ll conclude this tutorial by quickly running through a recovery scenario.

Step 6 — Test Restore from Physical Backup

To restore our MySQL database from the physical backup we previously uploaded to Spaces, we’ll transfer the backup to our database server, and then use the extracted files as our restored MySQL data directory.

Let’s first transfer the backup from our Space back to the user’s home directory on the database server:

    
        
            
s3cmd get s3://mysql-backup-demo/mysql_backup_180423.tar.gz ~/mysql_backup_180423.tar.gz

You should see some file transfer output:

    
        
            
Output
download: 's3://mysql-backup-demo/mysql_backup_180423.tar.gz' -> '~/mysql_backup_180423.tar.gz' [1 of 1]
1451889 of 1451889 100% in 0s 38.49 MB/s done

We’ll now stop the running database server and purge the existing data directory, as we’d like to test a clean restore from the physical backup files.

First, stop the MySQL server:

    
        
            
sudo service mysql stop

Now, delete the contents of your MySQL data directory:

    
        
            
sudo rm -rf /data/\*

Recall that in this tutorial, the non-default MySQL data directory path is /data .

Now, extract the physical backup archive to your MySQL data directory:

    
        
            
sudo tar -xzvf ~/mysql_backup_180423.tar.gz -C /data

Now that the data files have been restored, we can restart the MySQL database and allow it to recover:

    
        
            
sudo service mysql start

Finally, we can log in to our database server to verify that the restore completed successfully:

    
        
            
mysql -u root -p

After entering your password, you should see the MySQL client prompt:

    
        
            
Output
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 4
Server version: 5.7.21-0ubuntu0.16.04.1 (Ubuntu)

Copyright (c) 2000, 2018, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql>

From here you can scan some tables to verify that your data is intact.

Conclusion

In this tutorial, we’ve demonstrated how to leverage LVM’s snapshot feature to freeze the filesystem and perform a full physical backup and restore of a running MySQL instance. If you use LVM to manage one or more storage volumes that contain your MySQL data, this feature provides a convenient method for backing up your production database.

In a production setting, this procedure should ideally be scripted and scheduled with proper logging, monitoring, and alerting. In addition, a FLUSH TABLES WITH READ LOCK (no matter how brief) should not be run on the master server but on a minimally loaded replica. Note that with slight modifications, you can also adapt the above procedure to quickly spin up replicas from a master physical backup.

If your MySQL instance exclusively uses InnoDB as its storage engine, you can also use Percona XtraBackup to perform physical backups of your database in a similar fashion. To learn more, consult our tutorial on How To Back Up MySQL Databases to Object Storage with Percona on Ubuntu 16.04.

A reasonable alternative to uploading physical backup files to Spaces would be to use LVM snapshots in combination with Droplet Snapshots. To learn more about Droplet Snapshots, consult DigitalOcean Backups and Snapshots Explained.

To learn more about DigitalOcean Spaces, the object store used in this guide, consult An Introduction To DigitalOcean Spaces.

This tutorial was originally published on the DigitalOcean Community website.
Control Panel Blog Pricing Careers Terms Privacy Status API Docs Tutorials Support